₹ 599.00 - ₹ 299.00
(as of Jun 24,2020 01:08:52 UTC – Details)
SOLD BY :CHALOWKART How to use step 1: holding- support the bottom of the machine with the four fingers of your right hand and then putting your thumb on the top of the machine for your holding the machine tightly. Step 2: threading – 1. Put the top of the listle beside the needle, and then thread the lisle through the needle by using the threader 2-3 cm. 2. Lift the cloth fastening plate with right forefinger and put the cloth under fastening plate and then settle down the fastening plate. 3. Press the top of the machine up and down and do over, then the right hand should move to right step by step and let left hand hold the cloth the control the direction. 4. You can adjust the bolt for the optimal habits, adjust nut. Step 3: replace needle – loose the set-screw with a screwdriver and take off the old needle. Notice to let the flat part of needle face the invariant set screw. What other items do customers buy after viewing this item
how to use sewing machine watch this you tube video for hindi use this link https://youtu.be/GuLPh_1w7mc FOR ENGLISH use this link https://youtu.be/tef8MYJN7h4
60 Sewing Speed; Continue the process until the damaged portion of the cloth is hemmed
A single press will yield one stitch.
TO FINISH STITCHING pull out the thread’s end about 2 inches over the cloth towards the left and cut the thread with scissors. After pushing down the needle and raising it up lift the cloth fastening plate with your right hand forefinger and pull out the cloth to the left.To keep both needle and cloth safe confirm that the needle is not in the cloth. Tie the excessive thread on the back side of the cloth to ensure a tight finish. pull out the thread end to the back side of the cloth and then tie